Using ODABAN® Antiperspirant is straightforward and usually completely effective. The product should be applied only at bedtime after bathing, when relaxed, to DRY skin (use a little talcum powder or a hair dryer). It is very important the skin is dry, as any moisture will break down ODABAN® to form irritants. Apply ODABAN® sparingly; just one or two sprays directly or indirectly using a cotton wool pad or cotton bud. As the skin on the feet is relatively thick a little more ODABAN® can be applied per treatment if required, the cling-film / Saran wrap technique using a lightly soaked cotton pad held in position over night will also help increase the drying effect. The following morning the feet should be washed to remove any excess product. A moisturiser and other foot products can be used in conjunction with ODABAN® but not prior to application or until the skin has been washed the following morning. It is critical when first using ODABAN® to avoid applying too much as this will block the sweat ducts completely which will result in an eventual bursting of the “dam walls” and a swift return to the original wetness problem. Try to always wear shoes and fabrics that “breathe” and wick moisture away from the foot area.